Dimatec Inc. Logo

Operating Parameters

We want you to get the most out of the product that you have selected for use on your project. The application of the correct operating parameters is essential to optimizing your product selection in the field. The drill operator should take the time to determine the ideal operating parameters with respect to rotational speed, bit load and circulation fluid requirements based on:

  • The expected formation conditions,
  • The capabilities of the drilling equipment,
  • The type of core bit that has been selected for use.

As a resource, this page provides access to the full library of Dimatec operating parameter documents in PDF format.

Rotational Speed 
Bit Load
Bit Hydraulics

Testimonials

“325 meters with our bits very good in medium hard rock. Thank you!”

– Ontario, Canada

“The successful trial results of the bit prove this bit to be a serious alternative to our current bit of choice at our mine.”

– Australia

“I have a result from a new client in northern Ontario. Their last bits went 60 or 80 meters and with Dimatec bits 212 meter! Good production thank you.”

– North America

“We received the bits yesterday! We are quite pleased with all aspects of this order including the 4-day lead time. Thank you for the expedited service!”

“The meters drilled were above ‘the norm’ and we were well within and even under budget lets say…”

– Canada

“We had a good wear on the crown, the meters achieved are also worth commenting on being consistently all right around the 300’ mark. We’re happy and the reaming shells are also performing well.”

– North America

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram